• ꁸ 回到顶部
  • ꂅ 15611514533
  • ꁗ QQ客服
  • ꀥ 微信二维码
首页  ꄲ  Highland Technology  ꄲ  Highland Technology T130单通道皮秒EOM驱动器
ꁆ ꁇ
· 三个档位可编程延时与脉宽
· 输出幅度可编程,在 50Ω 负载上为 -0.5 V 至 -7 V
上升时间/下降时间典型值 100 皮秒(10%–90%)
内置脉宽发生器,FWHM 可调范围 250 皮秒至 300 纳秒
内置偏置电源,可调范围 ±6 V
由 +24 V 直流电源供电
支持 USB、RS-232 或板载微调电位器控制
内置自测试(BIST)
紧凑型挤压成型外壳,附带表面安装法兰

Highland Technology T130单通道皮秒EOM驱动器

联系方式

电话/微信:15611514533
邮箱:info@aphoton-oe.com
申请试用
询价

产品详情

T130单通道皮秒EOM驱动器

T130 专为高脉冲输出驱动能力和多功能性而设计。与典型的电信级电光驱动模块不同,T130 提供完整的 7 V 峰峰值幅度摆幅,是驱动高 Vπ 电光调制器类器件的理想选择。
T130 采用边沿触发方式,具备超低皮秒级抖动性能,并提供三档可调延时,脉宽覆盖 250 皮秒至 300 纳秒。内置偏置电源、集成偏置三通(bias-tee)及继电器,可在高速射频路径上为单端口 EOM 提供 -6 V 至 +6 V 的直流偏置,也可通过专用偏置端口为双端口调制器供电。USB、RS-232、BIST(内置自测试)以及本地微调电位器控制均为标准配置。T130 是控制 LiNbO₃ / 马赫-曾德尔(Mach-Zehnder)"电平切割器"及类似 50Ω 电-光相位/幅度转换器件的极佳方案。

典型应用:

  • 驱动 50Ω 电光相位调制器与强度(幅度)调制器

  • 驱动泵浦光纤系统中的 50Ω 直接调制种子激光器

  • 射频应用:快速脉冲调制、相移、谐波产生

  • 时域器件表征与建模

  • 半导体测试

  • 系统电缆/时序微调

Specifications

FUNCTION

Externally-triggered single-channel pulse generator and EOM driver

TRIGGER

Rising-edge trigger, 50Ω input impedance, DC coupled

Threshold: +0.5 volts

Max safe input: -0.6 volts to +6 volts

PROPAGATION DELAY

Range 1: 8ns nominal insertion delay

Range 2: 20ns nominal insertion delay

Range 3: 70ns nominal insertion delay

RF OUTPUT

User adjustable -0.5 volts to -7 volts peak into 50Ω loads; AC-coupled

PULSE RATE

Min pulse rate is 0 Hz

Range 1: max 50 MHz depending on delay/width settings

Range 2: max 25 MHz depending on delay/width settings

Range 3: max 5 MHz depending on delay/width settings

RISE/FALL TIMES

100ps, typ measured at 10/90%

PROGRAMMABLE TIMINGS

Range 1: delay 0 to 5ns width 250ps to 5ns d+w < 5ns

Range 2: delay 0 to 50ns width 500ps to 50ns d+w < 50ns

Range 3: delay 0 to 300ns width 1ns to 300ns d+w < 300ns

Ranges are selectable by front-panel DIP switch or remotely

JITTER

Range 1: < 3ps RMS typ.

Range 2: < 10ps RMS

Range 3: < 50ps RMS

BIAS SUPPLY

Internal / External DC bias tee injection at RF OUT

Internal BIAS supply adjustable ± 6 volts, 100 mA max

BIAS connector serves as Hi-Z voltage monitor when set to INT mode

CONTROL

Trimpots, RS-232, and USB

OPERATING TEMPERATURE

0 to 50°C, non-condensing

CALIBRATION INTERVAL

One year

STORAGE TEMPERATURE

-20 to 80°C

POWER

+24 volts at 250mA, max

J24 universal wall-plug power supply furnished

COMMUNICATION

USB, RS-232

CONNECTORS

TRIG RF OUT RF MON BIAS OUT SMA jacks

Standard B receptacle for USB control, 2.5mm phono jack for RS-232

LED INDICATORS

Green POWER Blue TRIGGER Orange COMM Red ERROR

PACKAGING

4.84” (L) x 4.06” (W) x 1.20” (H) extruded aluminum enclosure

Mounting flange furnished

CONFORMANCE

OEM product has no UL/FCC/CE compliance requirements

Designed to meet UL/FCC/CE requirements

 

넶浏览量:0